Skip to main content

Five Reasons for Corrosion Control in Critical Control Rooms

Failures due to corrosion are a common thing in electronics used in control rooms. Critical control rooms need to work without any downtime as the operations are crucial. Electronic process-control equipment which varies from remote sensors to distributed control systems makes any facility functional and operational and keeps them up and running. To achieve this, it requires the correct sensor functioning, communications, and process control. But eventually it is being observed that these critical electronics are catastrophically failing due to the damaging environment in which they are functioning. Please refer the article- Electronics failures and corrosion in industries to know more about the corrosion on electronics.

The working environment must be managed by employing proper corrosion monitoring units and corrosion control equipment to prevent corrosion in control rooms. In this article, let us try to understand the 5 major benefits of corrosion control and monitoring.

 

Benefits of Corrosion monitoring and control.

  1. Reduction in the maintenance cost.

The cost of maintenance of a control room can be phenomenal. Most of the maintenance goes in towards the replacement of sensors or controls which have failed due to corrosion.

  1.  increasing the longevity of hardware equipment

 

The lifespan of electronics working in an unsafe environment will vary from a few weeks or months depending on the severity. For example, a sensor whose lifespan is expected to be 2-3 years might fail within 12-18 months. Adequate Corrosion control measures can increase the lifespan of electronic hardware.

 

  1. Prevents operational losses

 

Corroded equipment can disrupt the entire functioning of control rooms when it breaks down causing unexpected delays and loss. Proper monitoring techniques can identify the severity of the operational environment and prevent this disruption from happening.

 

  1. Enables a healthy and safer environment for employees

 

Failures due to corrosion not only puts a company’s revenue at risk but also poses a threat towards its employees. Most of the catastrophic failures are due to short circuiting of electronics which is a greater threat towards health and safety of employees as well as the premises. Effective corrosion management can prevent failures of electronics.


  1. Increases productivity

All the time saved with good corrosion management will be fruitful towards increasing productivity and revenue.

We at AQOZA technologies offer the best corrosion management for any critical control room or data centres. Being a specialist vendor in gas phase filtration and monitoring, AQOZA offers optimum performing corrosion control units to various industries. Get in touch with our experts in corrosion control now !!!

Comments

Popular posts from this blog

How To Remove The Smell From The Sewage Treatment Plant

There are various reasons for determining the bad odour from any sewage mechanism and ascertaining those grounds is one of the most integral steps to control the odour.  Seemingly, anaerobic decomposition of organic compounds generates a foul odour at the sewage treatment plant and their low solubility in wastewater makes them liberate into the environment causing offensive odour. Understandably, these sewage odours often pollute the entire nearby surroundings and are not meticulous matters that can be tolerated. Although controlling these repellent odours sometimes get a bit challenging, however, few steps can be pursued. Initially, we would recommend discovering the reason behind odour and then trying to look for  odour control technologies   accessible.  Consult an expert If you haven’t treated the plant in recent days or didn’t consult for service, we would suggest speaking to your local service providers. Some plants require a deodorizing misting system to target volatili

Study Odour Emissions & Solution evolving at Wastewater Treatment Plants

Examining wastewater problems are complicated as it requires healthy research, brown study of techniques and technologies, diversified applications and more. Foremost, it is important to worth notice the real objective of solving odour problems generating from wastewater plants is challenging Not only at industries but residents more often complaint about odour gases evolving exponentially. It has been observed that wastewater treatment plants produce significant volumes of odour that must be reduced before contaminated air starts destroying outdoors & climate and thus requires a call for odour control wastewater treatment . The ideal solution or treatment can remove the mix of gaseous compounds by more than 99 per cent. The sources of odour pollution are many and could be the large-scale spreaders if located in towns, close to commercial areas. Thus, a competent odour control system in these areas is a precondition. There are several solutions depending upon the level of filtra

Activated Carbon

Have you ever thought about why activated carbon is widely used for air purification? No! Right? Before knowing much about the activation process, it is significant to derive the essence of activated carbon. What is activated carbon? Activated carbon is widely installed and used as an adsorbent derived from carbonaceous raw material for the removal of natural organic compounds, taste and odor compounds, and synthetic organic chemicals and for purifying air and water. And it is of no great news, that it has become a popular choice among all due to its multiple offerings like good adsorption capacity, active free valances, high surface area, porous structure, surface reactivity, inertness, and thermal stability. Why activated carbon is widely used for air purification? The simple answer is 1gm of activated carbon has a surface area of up to 3,000 sq meters only to capture the odorous air molecules, which is equal to the area of a football stadium. Confused? Activated carbon contai

How To Combat Odour Problems At Industrial Wastewater?

With the quality of water around us deteriorating each second, it's nothing but pollution, mandatory for each organization to take concrete steps in working towards resolving the issue, the industries must take it upon them to take all necessary precautions and preventive measures to enhance their contribution to it. The emissions from the wastewater plants in the industry are not only toxic at times but also extremely pungent and fusty. They can cause serious harm to the people working in and around it and also affect their productivity by leaps and bounds. Before investing money mindlessly into buying an odour control system for wastewater treatment. Water treatment products and applications may tackle a wide range of challenges under odour control solutions . It is important to recognize the various parameters related to these smell causing substances like Monitoring the Odour - Recognize the source of this odour. Based on the root cause of the odour, different methods can

Best Odour Control System in India

Air pollution  — ‘the discharging of pollutants in the air, is one of the top five risk factors undulating in many countries. It is responsible for uncountable health sufferings, extremely poor atmosphere quality and many other environmental wreckings. The most natural air pollutant VOCs is one of the amenable air pollutants amongst different air contaminants. Its frequent emissions from industrial spaces, municipal compounds, wastewater plants, indoor residential and commercial areas, data centres etc registered as the major origins of polluted, poisonous and nauseating atmospheric gases. Considering, one of the biggest aftereffects of streaming gases in the vicinity of each living and working facility, is the start of toxic odours, dreadful health risks, business futurity. As a result, everything will be arrested by the ‘whorl of odour’. Thus, it is conducive to be a part of the solution, not a part of odour pollution. What is the above-board resolution to unpleasant odour? A system

Odour in Your Industrial Unit?

Working in an industrial unit is not an easy job, you have to be on your toes all the time, be safe and look out for others safety as well, many times you are required in extreme conditions, from really low temperatures to extremely higher ones and with that more often than anticipated, you work in an environment where even breathing properly is a luxury because of the persistent pollutants and odour gases that are dispersed in the air at all times. These conditions not only affect the health of the employees but also slacken the overall productivity of the unit.  Having said The following are some pointers for you to control odour in your unit: 1. Action at source - After identifying the source of odour in your unit, needs tackle by extracting and removing these odorous gases by proper odour removal technologies. The selection of odour control technologies depends on gases emitting and removal efficiency required. This is an ideal way to make sure, no odour in the surroundings and

Odour Control in Wastewater

Odour problems generating from wastewater systems is one of the critical behavioural phenomena. Research says that most of the sewage treatment plants in India operate without odour control systems. Do the untreated ones release environmental problems? What happens, if the odour remains untreated for life? Wastewater or sewage is the outcome of water along with suspended material. The solid material consists of detergents, chemicals, oils, plastics, metals, food leftover, sand etc. The main sources registered is that of municipal, industrial, domestic and agricultural industries. Hundreds of wastewater process that encompasses accumulation, storage and treatment are responsible in generating ‘odorous gases’ that further leads to the abatement of the life span of workers, health standards of local residents and poisonous odour around the planet. This chain of wastewater networks disperses pungent smell, needs effective odour control solutions in wastewater plant treatment. Though there

Odour Control Management in Industries

 From food processing industries and landfills waste to sewage treatment plants and chemical processing units, odour emanation is potent in all forms. Odours produced by a variety of organizations is an ongoing process. That’s why the constant pressure on facilities to keep the odour pollution at bay, is on rising. What practices one should follow to control Industrial odour? While many industries work towards the former issues, they often overlook the problem that nasty and stinky odorants create. The pungent smell coming out from the various units is not only a cause of health concerns but also reduces the overall productivity of the employees working there. Odour management refers to an instrument statement of guidelines or manual of instructions for industries and employees. There are mixed procedures to be followed by both on daily basis to control fugitive emissions contributed by Industries.      Amplifying some of the best practices on odour management.    1. MONITOR & ANAL

How to Estimate the Odour Control Unit Capacity?

  For wastewater treatment facility, odour control unit capacity is estimated based on the two parameters: ·       The Air volume of odour causing process tanks ·        Air exchange factors to be considered for the process tanks While estimating the air volume of the process tanks, if it is a fixed water level tank, freeboard air volume shall be considered; if it is fluctuating water level, it is advised to consider the air volume from the lowest water level . Air exchange factors are very critical in designing the odour control system capacity and which impacts the size and efficiency of the odour removal. Most of the regional municipalities have made clear guidance on the air exchange factors to be considered while estimating the odour control system capacities. Typically, for inlet works, air exchange factors are considered in the range of 12-15 of the volume of the air. And for the sludge treatment facility, it will be 6-12 of the volume of the air, it depends on the v

Odour Control Units at Rescue

From Industrial to healthcare and wastewater to chemical plants, the demand for removing odour at the facility has been increasing. Odour control units at multi- sectors now Odour induces from Industrial units, oil and gas refineries, various municipal facilities, chemical industries and more have an obnoxious smell that naturally becomes the causing factor to an environment. Moreover, it affects the health and efficiency of labours, staff and community living or situated at nearby locations. It is general that when the ongoing activities related to chemical discharge, water treatment at sewages & sludges, accumulated solid substances at industrial units, activate the challenges related to odour. They are efficient enough to remove the odour from various compounds such as hydrogen sulphide, ammonia and organic volatile compounds. Therefore, the application of a competent odour control system is praised to maintain the full-grown ambient atmosphere parameters. Rising demand to tr