The odour created from the wastewater system is because of hydrogen sulfide released in the form of gas. Moreover, hydrogen sulfide results in corrosion in collection systems and wastewater treatment plant equipment. Various emission sources also require odour control units like pump stations, sludge dewatering, manhole, etc.
The odour coming from sewage and effluent comprises hydrogen sulfide, and it is pretty dangerous when released in the environment. Odorous gas also consists of ammonia and organic Sulphur components. Even though most odours generally do not cause any physical health issues, malodour affects the surrounding, leading to complaints to the source.
This source of H2S emission is very much the same as VOCs,
with the only difference being the Sulphur compound's presence. odour control
units that are safe and efficient assist in solving complicated odour
pollution. Their applications are mainly used to remove odour from the sewage
treatment plant, sludge, paper &pulp industries, solid waste processing
plant, etc. They will cover the foul odours and help you get rid of them
efficiently by neutralizing or adsorbing the odour molecule. They are also
designed for removing VOC and for meeting hazardous air pollutants along with
other regulations.
For designing an efficient odour control unit, it depends
on two main parameters:
● Air volume
● Air
exchange
While calculating the air volume of any process tank, if it
is an affixed water level tank, then freeboard air volume should be considered.
But when it fluctuates, it is recommended to consider air volume from low water
levels.
Air exchange is one of the essential factors to consider
while designing the odour
control system and one that impacts the size and effectiveness of the
odour removal. Many regional municipalities have given guidance on-air exchange
factors during the estimation of odour control system capacity.
While considering inlet works, the air exchange factors
should be 12-15 times the air volume. A sludge treatment facility must be
6-12 times of air volume, and it is based on room ventilation, aerated tanks,
etc.
Depending on these processes, the engineers can easily
assess the required sufficient capacity
of the odour control unit that system manufacturers should verify. To have
better clarity, you can also contact an odour control specialist.
Look for the best odour control services for ideal odour control management.
Comments
Post a Comment